Improved straightening costs for material removal and roughing! Introduction of slicing processing by wire discharge contour machine!!
(1) Purpose In the material removal of high-hardness materials, the blade escaped with the existing band saw and the yield was poor. I was doing slicing with a wire electric discharge machine, but it takes time to process and stagnation occurs in other machinings, so I want to improve the process of material removal. (2) […]
【During the campaign】Drilling and threading are processed simultaneously with one tool! Thread cutting tool "Thread Mill"
What is a thread mill? It is a new threading tool that replaces the "tap" used for normal threading in cutting tools. Drilling and threading can be drilled simultaneously with a single tool, greatly reducing tool change time. ➀ Purpose Solving the problem of tap processing with a thread mill Automation of thread cutting of […]
It is now possible to measure large workpieces that could not be measured so far! Introduction of a solution for observing large workpieces using a digital microscope
➀ Purpose It was a customer who manufactured large molds (tire molding applications), and the finish of laser processing on the mold was checked with molded products. Since the sample work was large at about 2 m and could not be inspected with a general microscope or measuring instrument, it was checked with a cut […]
The effect of 50% reduction in manufacturing costs! Example of introduction of CAM software for automatic generation of processing programs
➀ Purpose Daytime time is taken up to create a machining program, and the operation rate of machining at the machining center decreases. It takes time to train NC program mers, but there is a problem that we want to reduce the time required to create machining programs and increase the utilization rate of machining […]
20% cost reduction!! Introducing a case study of graphite processing with Nikko Equipment's original diamond coating end mill!!
➀ Purpose Using tools from domestic manufacturers, they were processing graphite, which is a brittle material, but they were struggling to maintain machining accuracy and surface quality due to the occurrence of wear and chipping. In order to stabilize the quality, the number of tool changes increased, which was costly. By selecting tools with excellent […]
"Shortening Grinding Processing Time on the Order of Microns with a New Method: Rotating Grinding Wheel Measuring Camera System"
➀ Purpose Due to the influence of the shape of the grinding wheel and the runout of the grinding wheel shaft in precise grinding processing, there was a problem that it was necessary to repeatedly check the shape of the grinding wheel by discarded research (dummy machining) and check the workpiece after grinding processing in […]
➀ Purpose Increased efficiency and cost reduction of mold-based roughing operations (2) Points of introduction The Φ16 high-feed cutter made by another company that had been used in the past was switched to the TD4N made by MOLDINO. Shortened machining time by greatly increasing processing efficiency and cost reduction by improving the durability of inserts. […]