Mold-based roughing processing Achieved processing efficiency 2.8 times!!
➀ Purpose Increased efficiency and cost reduction of mold-based roughing operations (2) Points of introduction The Φ16 high-feed cutter made by another company that had been used in the past was switched to the TD4N made by MOLDINO. Shortened machining time by greatly increasing processing efficiency and cost reduction by improving the durability of inserts. […]
Automating coolant liquid replenishment and concentration management of machine tools! Zero daily process of adding processing fluid!!
(1) Purpose When machining with a long machining time, the coolant becomes insufficient, and an alarm is issued and the machine stops. The task of adding to the patch became laborious, and it was a state where people had to get it. (2) Points of introduction Introduced Iwamoto Kogyo's "Raku~Ranto". ・ By connecting pipes from […]
Aluminum grooving reduces machining time at twice the feed rate
➀ Purpose Reduction of processes and machining times in aluminum grooving (2) Points of introduction DLC coating, which demonstrates its power against non-ferrous metals such as aluminum alloys that require weld resistance and lubricity, improves durability and shortens processing time by increasing feed rates. Comparison of feed rates of various companies (3) Processing verification Machining […]
Measure 1/100th on the machine after processing on a turret lathe! Example of use of on-board measuring machine!!
(1) Purpose After machining the outer and inner diameters on a lathe, the dimensions are measured by measuring outside the machine. The number of 3D measuring machines is limited, and it is necessary to solve the stagnation of the process with an on-board measuring machine when stagnation to the next process occurs while waiting in […]
Greatly improved the drawing speed of STL data with many faces and ridgelines! Introducing examples of the use of reverse engineering by Camtus!!
(1) Purpose When a mold for which no drawing exists was measured with a measuring instrument or digitized as STL data by a 3D scanner, the amount of information was large and it took a lot of time to read. In order to be able to read and manipulate such STL data at high speed, […]
Reduced work time from 40 minutes to 2 minutes! High-efficiency, high-precision drilling of high-hardness steel
(1) Purpose Process in drilling of high-hardness steel, shortening of processing time (2) Points of introduction It is a tool with high rigidity and cutting edge strength suitable for high-hardness steel, and a special groove shape that enhances chip discharge, and shortens the time to use in non-step processing after quenching. Reamerless processing is possible, […]