Skip to the content Skip to the Navigation
Nikko Kizai Inc.
  • TOP
  • Case Studies
  • Corporate Profile
    • CSR
  • Tools Department
    • Introduction of the original product
    • Mold Based Division
      • Works
  • Machinery Department
  • Contact Us
  • JapaneseLanguage

Case Studies

  1. TOP
  2. Case Studies
  • Aluminum grooving reduces machining time at twice the feed rate
    Peripheral Equipment
    20/12/2021

    Aluminum grooving reduces machining time at twice the feed rate

    カテゴリー

    Peripheral Equipment
  • Measure 1/100th on the machine after processing on a turret lathe! Example of use of on-board measuring machine!!
    Peripheral Equipment
    20/11/2021

    Measure 1/100th on the machine after processing on a turret lathe! Example of use of on-board measuring machine!!

    カテゴリー

    Peripheral Equipment
  • This finish is an ordinary machining center ...!?We succeeded in finishing the micron order with a single shot on the standing wall of 80mm!!
    Peripheral Equipment
    20/10/2021

    This finish is an ordinary machining center ...!?We succeeded in finishing the micron order with a single shot on the standing wall of 80mm!!

    カテゴリー

    Peripheral Equipment
  • Greatly improved the drawing speed of STL data with many faces and ridgelines! Introducing examples of the use of reverse engineering by Camtus!!
    Peripheral Equipment
    20/09/2021

    Greatly improved the drawing speed of STL data with many faces and ridgelines! Introducing examples of the use of reverse engineering by Camtus!!

    カテゴリー

    Peripheral Equipment
  • Reduced work time from 40 minutes to 2 minutes! High-efficiency, high-precision drilling of high-hardness steel
    Peripheral Equipment
    20/08/2021

    Reduced work time from 40 minutes to 2 minutes! High-efficiency, high-precision drilling of high-hardness steel

    カテゴリー

    Peripheral Equipment
  • Achieves both a maximum 15% reduction in power consumption during machining and high-precision machining! Western Electric wire electric discharge machine adopting a new power supply!!
    Peripheral Equipment
    20/07/2021

    Achieves both a maximum 15% reduction in power consumption during machining and high-precision machining! Western Electric wire electric discharge machine adopting a new power supply!!

    カテゴリー

    Peripheral Equipment
  • Introduction of the verification effect of "From 30 hours to 3 hours!
    Peripheral Equipment
    20/06/2021

    Introduction of the verification effect of "From 30 hours to 3 hours!

    カテゴリー

    Peripheral Equipment
  • Reduce material loss rates! Introducing the effect of introducing an on-board measuring machine!
    Peripheral Equipment
    20/05/2021

    Reduce material loss rates! Introducing the effect of introducing an on-board measuring machine!

    カテゴリー

    Peripheral Equipment
  • Reduced machining time by 67%! Introducing a case study of high-efficiency processing using KC polar end mills!!
    Peripheral Equipment
    20/04/2021

    Reduced machining time by 67%! Introducing a case study of high-efficiency processing using KC polar end mills!!

    カテゴリー

    Peripheral Equipment
  • Lead time reduced by 93%! Introduction of the hybrid method of cutting + grinding!
    Peripheral Equipment
    20/03/2021

    Lead time reduced by 93%! Introduction of the hybrid method of cutting + grinding!

    カテゴリー

    Peripheral Equipment
«前へ
1 … 4 5 6 7
次へ»

Category

  • Machinery
    • Machine Tools
    • Software
  • Measuring Instruments
  • Peripheral Equipment
  • Tools
    • Environmental Supplies
    • Materials
    • Tools and Jigs

Copyright © Nikko Kizai Inc. All Rights Reserved.

MENU
  • TOP
  • Case Studies
  • Corporate Profile
    • CSR
  • Machinery Department
    • Products
  • Tools Department
    • Products
    • Mold Based Division
      • Works
  • Contact Us
  • Japanese
PAGE TOP