Featured Products
MOLDINO Co., Ltd. / “ER5HS-PN” High-Efficiency End Mill for Side Milling
➀Purpose
To meet tight deadlines, we need to cut down on the time spent on rough machining!
②Key Points for Implementation
・We were looking for an end mill that could reduce machining time.
・We currently use inexpensive carbide end mills made overseas to cut tooling costs, but we were looking for a product that offered better value for money, even if the unit price was slightly higher.
③Examples
The MOLDINO high-efficiency side-cutting end mill “ER5HS-PN” was used to achieve stable, ultra-high-efficiency machining by increasing the axial (cutting length) depth of cut.
④Results
・In test machining, the processing time, which used to take about 10 minutes with conventional tools, was reduced to about 2 minutes, resulting in an approximately 80% time savings.
・Both the machining noise and the machined surface were excellent, and chattering at the corners was suppressed.
・By using the ER5HS-PN for rough machining, we were able to consolidate processes and tools, thereby improving the machining process.
Recommended for those facing these concerns or challenges
・We want to make the most of our existing equipment
・We want to reduce rough machining time
・We want to reduce the number of machining steps
・We want to reduce the number of tools used
Here are the benefits you can expect from implementing this!
By using ER5HS-PN for rough machining instead of high-feed tools or tools designed for finishing, it is possible to consolidate both processes and tools.
