Introduction of the original products

Here’s the headline.

This page is the original product introduction page of the tool division.

JIMK NK End Mill

Click on the image to see the catalog details
“The cheapest place in Japan” High-performance carbleed end mill

From non-ferrous materials such as aluminum and copper, it is ideal for processing carbon steel, pre-hardon steel, and hardened steel of HRC48 or less. Ball end MIRUS that can process HRC50 or higher high hardness work are also available.

Features
  • Surprising low price setting
  • We can also manufacture sizes that are not in the ready-made lineup.
  • TiAln coating for processing a wide range of hardness workpieces

MOLDINO PN

Click on the image to see the catalog details
Joint development with MOLDINO! Realize the low price!

It is a carbleed end mill with PN coating that has excellent welding resistance and is ideal for processing mold materials and parts below HRC50.

Features
  • High welding resistance and processing of aluminum materials, copper, and resins
  • Excellent sharpness due to the adoption of the original position flutes type
  • Versatile two-flutes, four-flutes square-end mill
  • Low price while made by MOLDINO

Mordino ATH

Click on the image to see the catalog details
Joint development with MOLDINO! Realize the low price!

This is an ATH-coated carbed end mill that can process high-hardness materials from pre-hardened steel to HRC60.

Features
  • From pre-hardened steel (HRC40 or more) of plastic mold material,
  • Can be used for processing a wide range of workpieces, from SKD11 kinds of press mold materials to hardened materials
  • Excellent sharpness due to the adoption of the original position flutes type
  • Versatile two-flutes, four-flutes square-end mill
  • Low price while made by MOLDINO

Mordino SD

Click on the image to see the catalog details
Contains the text. Contains the text.

Contains the text. Contains the text. Contains the text. Contains the text.

Features
  • Contains the text. Contains the text.
  • Contains the text. Contains the text.
  • Contains the text. Contains the text.
  • Contains the text. Contains the text.

Mordino PN MIRUS

Click on the image to see the catalog details
The ultimate collaboration between the ultra-efficient end mill “Epoch MIRUS” and the ultra-lubricated “Panasia Coating”
Specification
  • Moldino
  • Carbilled end mill
  • 4 flutes
  • 2 types of deployment (regular type, lower neck 3D
    c type) – Regular type: 5 size expansion from 6 to
    16 – 3Dc type under the neck: 4 sizes from 6 to 12
  • Wave flutes type
  • Flutes diameter tolerance: 0 to -0.05
Features
  • Time-reduced by high cut
  • Panasia coating for a variety of materials
  • The tool aggregation of the later process can be reduced, and the tool cost is reduced!
  • Stable processing with reduced vibration is possible!

Mordino Threads 3D Type

Click on the image to see the catalog details
MOLDINO Co-developed with Jimk Original Epoch D Thread Mill 3D Type TH Coating MOLDINO! The thread mill of the neck length 3D type of the japanese engineering equipment original is newly introduced! In addition, it is versatile!

With this one, drilling and threading of high-hardness steel can be performed at the same time. You don’t even need a lower hole! In addition, the high-strength flutes-shaped design reduces cutting edge damage in harsh processing environments with high-hardness steel!

★ for seven-size machining,
from ★ M3 to M12

Epoch Epoch is a registered trademark of MOLDINO

TAP SHOT

Click on the image to see the catalog details
A simple electric discharge machine dedicated to removing broken taps and drills!

It can be easily set to a processing machine or workpiece with a magnet, and you can choose where to work.

Features
  • Significantly shorter working time than shape-carved electric discharge machine (in the case of M6 tap, it can be removed in about 5 minutes)
  • Easy to use
  • 100V power supply
  • Energy-saving design

OSG

Click on the image to see the catalog details
Co-development of equipment! Ultra-hard multi-flutes end mill for standing wall processing WXL-EML
Specification
  • OSG
  • 46-degree helicala
  • flutes diameter tolerance:
  • Ultrafine-particle carbide alloy
  • WXL coating
Features
  • WXL coating makes it ideal for processing carbon steel, alloy steel and stainless steel
  • High helical, multi-flutes to ensure thick core thickness
  • In deep side milling, great surface finish with no chattering.
  • High precision milling by adopting center-hole shaping

Click here for Alibaba

For inquiries from overseas customers, please contact Alibaba.

Go to Alibaba site