Introduction of the verification effect of "From 30 hours to 3 hours!

(1) Purpose

Significant waste discharge, long service life, and a finishing cost of 0.1 mm are achieved by one-shot rough processing

(2) Points of introduction　

It is a tool developed for low-speed rotation and high-feed machining, and it is a tool that realizes low cutting resistance, reduction of vibration, and high-precision machining during high-hardness materials and deep digging machining. Even if it is not a high-speed rotating MC machine, you can perform highly efficient processing with your own MC machine.

(3) Processing verification

Improvement of lattice shape (improvement of roughing + mid-finish machining)
Current machining time 30 hours Number of tools used 7

　　　　　　　　　⇩

After the improvement, the machining time
is 3 hours, the number of tools used is 1 KC-KMRφ4XR1 (3 blades
) (details of improvement (1) tools, (2) cutting data, (3) data creation method, (4) process assembly method)

(4) Processing results

Voices from users who have verified < >
・ The cutting distance has been extended and the number of tools used has
decreased・ High-efficiency processing has been possible
even if it is not a high-speed MC machine ・ There is no problem with surface quality even if it is used for finishing processing